Knowledgebase
ESU Loksound V5.0 Decoder Wiring
Posted by Fiona F. on 17 July 2019 12:48 PM

As you may be aware, ESU have changed the style of their V5.0 sound decoders. Standard ones are based on the 21-pin decoder and have solder pads for hardwiring, however the micro is based on the Next18 decoder and has a harness with flat cable attached for 8-pin and 6-pin versions, the cable cannot be split for hardwiring, however there is a fix for this and by cutting the flat cable you can then use the solder pads on the harness pcb attachment to the micro decoder to wire to.

We have attached an easy to follow diagram for you.



Attachments 
 
 loksound v5 wiring.pdf (623.39 KB)
(1 vote(s))
Helpful
Not helpful